‑‑jlink_dcc_timeout
In this section:
Syntax
‑‑jlink_dcc_timeout=millisecondsParameters
millisecondsThe timeout in milliseconds. The valid range is 5-5000. The default value is 100 milliseconds.
For use with
The C-SPY J-Link/J-Trace driver.
Description
Use this option to specify a timeout for a pending request from C-SPY to the DCC agent on target.
Note
User-defined millisecond timeouts and delays are generated using the host operating system clock ticks. Because the host operating system is not a real-time OS, the actual delay or timeout will vary each time with approximately 5–20 ms.
Caution
To set this option, use Project>Options>Debugger>Extra Options.