Skip to main content

IAR Embedded Workbench for RH850 3.20.x

--LPD1_baud

In this section:
Syntax
--LPD1_baud speed
Parameters

speed

The communication speed in kbit/s. If this parameter is set to 0, the hardware default speed will be used.

For use with

Any C-SPY hardware debugger driver.

Description

Use this option to select 1-pin LPD communication and to set the communication speed. If speed is 0, the hardware default speed will be used, which might be lower than the highest possible speed. The Debug Log window shows both your specified communication speed and the actual speed. If you specify a higher speed than the hardware supports, the connection will fail.

Caution

Project>Options>Debugger>Driver>Setup>LPD 1

and

Project>Options>Debugger>Driver>Setup>Override default baud rate