Skip to main content

IAR Embedded Workbench for RL78 5.20

Getting started with trace

In this section:
To get started using trace:

  1. Start C-SPY and choose Emulator>Trace Setup. In the Trace Setup dialog box that appears, check if you need to change any of the default settings.

    Note

    If you are using the C-SPY simulator you can ignore this step.

  2. Open the Trace window—available from the driver-specific menu—and clickactivateButton.png the Activate button to enable collecting trace data.

  3. Start the execution. When the execution stops, for example because a breakpoint is triggered, trace data is displayed in the Trace window. For more information about the window, see Trace window.