Skip to main content

IAR Embedded Workbench for Arm 10.10.x

E2 menu

In this section:

When you are using the C-SPY E2/E2Lite driver, the E2 menu is added to the menu bar.

E2-Menu_Qt_Arm_01.png
Menu commands

These commands are available on the menu:

Memory Configuration

Displays a dialog box, see Memory Configuration dialog box for C-SPY hardware debugger drivers.

Enforce Memory Configuration

Prevents the driver from accessing any memory ranges in the zone Memory that have not been defined in the Memory Configuration dialog box.

Disable Debugger Cache

Disables memory caching and memory range checking in C-SPY.

Normally, C-SPY uses the memory range information in the Memory Configuration dialog box both to restrict access to certain parts of target memory and to cache target memory contents for improved C-SPY performance. Under certain rare circumstances, this is not appropriate, and you can choose Disable Debugger Cache to turn off the caching and memory range checking completely. All accesses from C-SPY will then result in corresponding accesses to the target system. Some of those circumstances are:

  • When memory is remapped at runtime and cannot be specified as a fixed set of ranges.

  • When the memory range setup is incorrect or incomplete.

Leave Target Running

Leaves the application running on the target hardware after the debug session is closed.

Because existing breakpoints might not be automatically removed, consider disabling all breakpoints before using this menu command.

Breakpoint Usage

Opens a window which lists all active breakpoints, see Breakpoint Usage window.