Skip to main content

IAR Embedded Workbench for Arm 10.10.x

ITM Trace Window Settings dialog box

In this section:

The ITM Trace Window Settings dialog box is available from the C-SPY driver menu, alternatively from the ITM Trace window toolbar.

ITMTraceWindowSettings_Qt_ARM_01.png

Use this dialog box to specify what to display in the ITM Trace window.

Requirements

One of these alternatives:

  • The C-SPY I-jet driver and an I-jet or I-jet Trace in-circuit debugging probe

  • The C-SPY J-Link/J-Trace driver and a J-Link/J-Trace JTAG/SWD probe

  • The C-SPY ST-LINK driver and an ST-LINK JTAG/SWD probe

  • The C-SPY TI XDS driver and a TI XDS probe

Force

Enables data generation, if it is not already enabled by other features using ITM trace data. The Trace window displays all generated ITM data. Other features in C-SPY, for example Profiling, can also enable ITM trace data generation. If no other feature has enabled the generation, use the Force options to generate ITM trace data.

The generated data will be displayed in the Trace window. Choose between:

Time Stamps

Enables timestamps for various ITM trace packets, Use the resolution drop-down list to choose the resolution of the timestamp value. For example, 1 to count every cycle, or 16 to count every 16th cycle. Note that the lowest resolution is only useful if the time between each event packet is long enough. 16 is useful if using ITM trace over the SWO communication channel at a low SWO clock frequency.

This option does not apply to I-jet.

PC samples

Enables sampling the program counter register, PC, at regular intervals. To choose the sampling rate, see ITM Configuration dialog box, specifically the option PC Sampling.

Interrupt Logs

Forces the generation of interrupt logs to the ITM Trace window. For information about other C-SPY features that also use trace data for interrupts, see Interrupts.

ITM Log

Forces the generation of ITM logs to the ITM Trace window.

This option only applies to I-jet.

Generate

Enables trace data generation for these events. The generated data will be displayed in the Trace window. The value of the counters are displayed in the Comment column in the ITM Trace window. Choose between:

CPI

Enables generation of trace data for the CPI counter.

EXC

Enables generation of trace data for the EXC counter.

SLEEP

Enables generation of trace data for the SLEEP counter.

LSU

Enables generation of trace data for the LSU counter.

FOLD

Enables generation of trace data for the FOLD counter.